Restoration. Connected.
From the first call to the paid invoice: intake, drying logs, moisture maps, gear, estimates and Xero invoicing, all in one record. Built for water damage, mould and cleaning crews who are done typing every job in twice.
- Flat monthly price
- Unlimited jobs and users
- Works offline
- Syncs with Xero
- Data stays in Australia
- Water damage
- Mould remediation
- Fire and smoke
- Contents pack-outs
- Carpet and upholstery
- Sewage clean-up
- Make safe
- Insurance work
- Builder work orders
- 1app, instead of a dispatch app plus a docs app
- $0per-job fees. Cancelled jobs cost nothing.
- 3taps to put a dehumidifier on a job, or bring it home
- 0bars of signal needed on site
Two apps. One job. Typed in twice.
Most crews run one system for dispatch and invoicing and another for drying records. Neither talks to the other, and both send a bill.
TodayTwo systems, three logins
- Job keyed into dispatch, then again into docs, then again into Xero
- Paying per job, even for assessments and jobs that fall over
- Readings on paper, photos on phones, plans in another app
- No idea which dehumidifier is where, or what it's earned this year
- Builder chasing your drying report at 9 pm
RestrixOne record, start to finish
- Work orders become draft jobs automatically. Approve, done.
- One flat monthly price. Unlimited jobs, users and plans.
- Readings, photos and maps live on the job, timestamped and GPS-stamped
- Every unit tracked, with hire days billed automatically
- Drying updates go out on their own. Reports in one tap.
Four days. One record.
Day 1 · Water's out. Now it's wet.
Extraction done, plan scanned, six reading points dropped on the map. Three units scanned onto the job, so hire starts counting with proof.
Everything a restoration crew runs on.
Real screens from Restrix. Take it for a spin in the live demo.
Every job lands in one inbox.
Builder and insurer work orders (sent through their portal or pasted from an email) and online bookings land in one place, with the client, claim ref and address already filled in.
- AI drafts the job. Nothing goes live until you approve it.
- Duplicate claim refs and addresses get caught before they cost you
- Matched to the right builder or insurer, at their rates
Know which jobs need you, before you open them.
Every job gets a health score and one next action. Your morning starts with what's at risk and what's unbilled, not a wall of numbers.
- Job Health across drying, compliance, documentation, money and schedule
- Unbilled hire and finished-but-not-invoiced work, in dollars
- Tomorrow's equipment needs checked against what's in the depot
A drying log that does the science.
Psychrometric chart, drying rate and dry-by dates for every chamber, in AS-IICRC S500:2025 terms. Stalled points get flagged before the builder asks.
- GPP, dew point, vapour pressure and grain depression, plotted day by day
- Drop per visit and an estimated dry date for every reading point
- Equipment sized to the chamber and the Class of Water Loss, from your own fleet
Know where every dehumidifier is. And what it's earned.
Your drying fleet is one of the biggest things you own. Scan it on, scan it off, and every hire day bills itself with timestamped proof.
- Add or return gear in three taps, even offline
- Missing units flagged when they go quiet
- Utilisation and return on every machine at EOFY
Price it right. Prove every line.
Scope templates by peril, recipes and each client's rate schedule. Every line links to its evidence, and GST adds up to the cent.
- Lines without evidence get flagged before the client sees them
- Talk through the site and AI drafts the scope
- Approved estimate to Xero invoice in one action
Built for flooded houses, not offices.
Big buttons, one-handed, and it works with no signal. Techs see today's jobs, what each client needs, and the gear on site.
- Photos tagged by room and time, with tag suggestions
- Signatures kept with name, time and location
- LiDAR room scans coming with the iPhone app
Reports on everything. Branded, one click.
AS-IICRC S500:2025 drying logs, completion packs and hire logs for every job. Plus a reports centre for jobs, money, gear, staff and compliance.
- PDF or CSV from any report or list
- Your logo on every page
- Overdue invoices and slow-drying points at a glance
From the call to paid.
The work order lands
Email, web form, text or missed call. Restrix drafts the job and matches the customer.
The crew gets it on their phone
Today's visits, big buttons for photos, readings, gear and signatures. No signal needed.
The customer picks and pays
Good, better or best, signed on their phone with the deposit paid.
You see what you made
Profit on every job, client, tech and estimator. Invoice synced to Xero.
The details that win the claim.
Client rules, checked live
Every insurer, builder and panel restorer's requirements run on their jobs as you work. Gaps block or flag the invoice.
Psychro, done for you
Temp and RH in. GPP, dew point and grain depression out.
Works with no signal
Readings, photos, signatures and gear scans save on the phone and sync when you're back in range.
Rates per client
Base catalogue, then each builder and insurer's schedule on top. Recipes price every line in one tap.
Contents with chain of custody
Room by room, salvage or not, QR boxes and signed disposal lists.
Paid by card, into your account
Text a pay link or take the deposit when the customer accepts the quote. It goes straight into your own Stripe account and marks itself paid.
Online booking
Carpet and upholstery cleans booked from your website: priced from your price list, into a free time in your schedule.
Two-way SMS and email
Threaded on the job, with templates for ETAs, drying updates and review requests.
Xero, GST sorted
Invoices go to your Xero with GST on income, your invoice number and the job reference. Estimates become invoices in one action.
Floor plans with readings
Draw the rooms in minutes; reading points, wet zones and gear go right on the plan. LiDAR scanning is coming with the iPhone app.
Free partner portal
Builders and insurers submit work orders and track their jobs and reports. Free for them, sticky for you.
Every change on the record
Who did what, when and where. Every reading, photo and scan is auditable.
Quotes that close themselves
Good, better and best options. The customer picks one, signs on their phone and pays the deposit. Follow-ups go out on their own, and you see your win rate by client and job type.
Book and pay online
Customers book a carpet clean from your website into a real free slot, and pay invoices from a text message.
One address book
Customers, clients, suppliers, subbies and staff, each a tap from every job they're on.
Profit on every job
Labour from timesheets, materials and gear costs against the invoice. Jobs losing money show up before you bill them.
Stock that reorders itself
Hysan, PPE and bags drop below their level and the purchase order goes to your supplier.
Nothing expires on your watch
White cards, IICRC tickets, van rego, test and tag and subbie insurance, with a warning 30 days out.
Made for the wet work.
Built in Australia, for Australian crews. AUD, GST, Xero, the Australian Privacy Principles, and your data hosted onshore in Sydney.
What the two-app stack leaves out.
| What you need | Dispatch app | Docs app | Restrix |
|---|---|---|---|
| Job intake, scheduling and dispatch | ✓ Yes | – No | ✓ Yes |
| Drying logs, moisture maps, psychrometrics | – No | ✓ Yes | ✓ Yes |
| Equipment tracking with hire billing | – No | – No | ✓ Yes |
| Per-client rates and compliance rules | – No | – No | ✓ Yes |
| Invoices synced to Xero | ✓ Yes | – No | ✓ Yes |
| Quotes with options, e-sign and deposits | – No | – No | ✓ Yes |
| CRM, stock, licences and profit per job | – No | – No | ✓ Yes |
| Unlimited jobs at a flat price | ✓ Yes | – No | ✓ Yes |
Per job. Per user. Per plan.
One flat price. Unlimited everything.
One monthly price for your business, based on team size. Early access crews help set it.
- Unlimited jobs, reports and floor plans
- Unlimited users, techs and subbies
- Free partner portal for your builders and insurers
- Xero sync included
- We move your data across from your old software
The things crews ask first.
Does it work with no signal on site?
Yes, it's built offline-first. Photos, readings, forms, signatures and equipment scans save on the phone and sync once you're back in range.
Do I need special gear for floor plans?
No. Draw the rooms on any phone or computer in a few minutes. LiDAR scanning on Pro iPhones and iPads is coming with the iPhone app.
Is the drying documentation up to standard?
Drying logs, moisture maps and psychrometrics are built around AS-IICRC S500:2025, with mould and sewage workflows to follow.
Can I bring my jobs across from my current software?
Yes. Import your clients, contacts, jobs, invoices, price list, equipment, staff and more from ServiceM8, Xero, Simpro, Tradify or any spreadsheet. Download a template or use your old system's export as it is, and we help you move across during setup.
Does it connect to Xero?
Yes. Invoices go to your Xero with GST sorted, automatically if you like, and supplier orders can go across as draft bills. Payments made in Xero flow back to Restrix.
Where is my data kept?
In Australia. Restrix is being built to the Australian Privacy Principles, and you can export all your data whenever you like.
When can I use it?
We're building it now with a small group of Australian crews. Register below and we'll be in touch about early access.
Get on the list. Shape the product.
We're building Restrix with a small group of Australian restoration crews. Early access crews get a say in what ships first, and in the price.